6 results for cb teardown

BITX40 Rebuild Part 1: Mistakes, Planning and Teardown

Things have been pretty busy around MiscDotGeek, and we’ve barely had time for Radio Related things. As I mentioned in the July 2020 update, my BITX40 quit transmitting while sitting stationary on my desk, dutifully doing its job as a JS8 radio, it quit transmitting. I put the uSDX in its place, only to have …

Continue reading

Salvaging old CB’s for QRP Parts: Part 4

In the previous three installments, we tore down two old CB’s and an even older tube based CB linear amplifier. Those teardowns were a lot of fun and a great way to look at the way things used to be done before frequency synthesis took over. In this final CB teardown, we’re going to look …

Continue reading

Salvaging old CB’s for QRP Parts: Part 3

In this third installment of Salvaging old CB’s for QRP Parts, we’re taking a slightly different turn. I still have another CB to tear into for the next post, but for this one, we’re changing it up a bit. Pictured below is a Mystery Box Thing that I purchased at a garage sale. It was …

Continue reading

Salvaging old CB’s for QRP Parts: Part 2

Welcome to the second installment of “Salvaging old CB’s for QRP Parts”! In part 1 of this series, we described how we found a bin of CB radios and accessories at an estate sale some time back. The first radio we salvaged for parts was a Pace CB 145. The radio was disassembled to see …

Continue reading

Salvaging old CB’s for QRP Parts: Part 1

About three years ago, I stopped at a garage sale on the way to a friends home. It turned out to be an estate sale full of goodies for a guy like me, always looking for things that can be used or repurposed. I spotted a red bin with a bunch of cables and wires …

Continue reading

Low Budget Tools and Parts For The Budget Builder

The uBITX is now out, QRP Labs QCX is on the market, and the BITX40 is still a fantastic kit- Hams all around the world are preparing burn some solder and get on the air! If the BITX40 has taught me anything it’s that you don’t need anything fancy to get your radio on the …

Continue reading